filename: tfs 108.doc version 1.1 30.01.2014 vectron international filter specification tfs 108 1/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 25 c input power level: 0 dbm terminating impedance: * input: 836 || - 16.1pf output: 827 || - 16.1pf characteristics remark: the reference level for the relative attenuation a rel of the TFS108 is the minimum of the pass band atte nuation. this value is defined as the insertion loss a e . the nominal frequency f n is fixed at 108.5 mhz without any tolerance. the v alues of relative attenuation a rel are guaranteed for the whole operating temperature range. the frequency shift of the filter in the ope rating temperature range is included in the production tolerance scheme. d a t a typ. value tolerance / limit insertion loss a e 7.5 db max. 9.5 db (reference level) insertion loss within 2.5db bw ae + 2.5db 10 max. 12 db nominal frequency f n - 108.5 mhz passband pb f n 0.5 mhz pass band ripple within pb 0.3 max. 2.5 db relative attenuation a rel f n - 0.5 mhz ? f n + 0.5 mhz 2.0 max. 2.5 db f n - 0.8 mhz ? f n - 1.2 mhz 21 min. 13 db f n - 1.2 mhz ? f n - 5.5 mhz 40 min. 34 db f n - 5.5 mhz ? f n - 22.5 mhz 50 min. 40 db f n + 1.5 mhz ? f n + 2.5 mhz 41 min. 20 db f n + 2.5 mhz ? f n + 9.5 mhz 42 min. 30 db f n + 9.5 mhz ? f n + 35.5 mhz 52 min. 40 db f n + 35.5 mhz ? f n + 45.5 mhz 60 min. 45 db f n + 45.5 mhz ? f n + 143.5 mhz 47 min. 40 db f n + 143.5 mhz ? f n + 153.5 mhz 80 min. 45 db f n + 153.5 mhz ? f n + 160 mhz 80 min. 40 db group delay ripple within pb gdr 200 max. 1000 ns iip3 - min. 30 dbm return loss within pb 12 min. 10 db input power - max 10 dbm operating temperature range otr - 40 c ... + 85c operable temperature range - 55 c ... + 85c storage temperature range - 55 c ... + 85c temperature coefficient of frequency tc f ** -0.036 ppm/k 2 *) the terminating impedances depend on parasitics and q-values of matching elements and the board use d, and are to be understood as reference values only. should there be additional questions do not h esitate to ask for an application note or contact o ur design team. **) ? f(hz) = tc f (ppm/k 2 ) x (t-t 0 )2 x f to (mhz) . generated: checked / approved:
filename: tfs 108.doc version 1.1 30.01.2014 vectron international filter specification tfs 108 2/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. 99 101 103 105 107 109 111 113 115 117 119 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 frequency in mhz s21 in db insertion loss: -7.46 db 107.5 107.7 107.9 108.1 108.3 108.5 108.7 108.9 109.1 109.3 109.5 -5 -4.5 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 frequency in mhz s21 in db 107.5 107.7 107.9 108.1 108.3 108.5 108.7 108.9 109.1 109.3 109.5 0.76 1.16 1.56 1.96 2.36 2.76 3.16 3.56 3.96 4.36 4.76 frequency in mhz gdr in s filter characteristic construction and pin connection (all dimensions in mm) date code 6 5 10 19 - 0,10 +0,20 6,50 - 0,10 +0,20 1 2,0 max. 1,91 7,62 2,31 1,02 1 50 test circuit l1 saw l2 10 5 1, 2, 3, 4, 6, 7, 8, 9 l3 l4 tfs 108 d18 1 input rf return 2 ground 3 ground 4 ground 5 output 6 output rf return 7 ground 8 ground 9 ground 10 input date code: year + week e 2014 f 2015 g 2016 ...
filename: tfs 108.doc version 1.1 30.01.2014 vectron international filter specification tfs 108 3/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respe ctively, 1 octave per min, 10 cycles per plane, 3 p lanes; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 15 min. each / 1 00 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions refer to the attached " air reflow temperature conditions" on page 4; 5. esd ansi/esd s20.20-1999 , class 1a for hbm this filter is rohs compliant (2011/65/eu) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 2000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direc tion pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w :32,00 0,3 po :4,00 0,1 do :1,50 +0,1/-0 e :1,75 0,1 f :14,20 0,1 g(min) : p2 :2,00 0,1 p1 :12,00 0,1 d1(min) :2,00 ao :7,10 0,1 bo :19,60 0,1 ct :25,5 0,1 reel (all dimensions in mm) a : 330 w1 :32,4 +2/-0 w2(max) :38,4 n(min) : 100 c :13,0 +0,5/-0,2
filename: tfs 108.doc version 1.1 30.01.2014 vectron international filter specification tfs 108 4/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 108.doc version 1.1 30.01.2014 vectron international filter specification tfs 108 5/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 - generation of development specification tcuk 26.07.2013 1.1 - change to filter spec. added characteristic p lots. tcuk 30.01.2014
|
